HP Unified Extensible Firmware Interface - Manual (Page 109)

Figure 100 Advanced Options — 1333 MHz Support for 3DPC-10600H HP SmartMemory screen
Setting 1333 MHz Support for 3DPC PC3-12800R HP SmartMemory
NOTE: This option is available on Gen8 with 3DPC PC3-12800R HP SmartMemory.
You can enable memory speed of 1333 Mhz for 3DIMM per-channel configurations. This option
should be enabled only when the system contains exclusively PC3-12800R HP Smart Memory.
To set 1333 MHz Support for 3DPC PC3-12800R HP SmartMemory:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Advanced Options→Advanced Performance Tuning Options→1333 MHz support for
3DPC PC3–12000R HP SmartMemory and press Enter.
2. Select one of the following options:
•
Enabled
•
Disabled (default)
3. Press F10 to accept your selection.
Accessing the BIOS/Platform Configuration (RBSU) menu 109