HP Unified Extensible Firmware Interface - Manual (Page 110)

Figure 101 Advanced Options — 1333 MHz Support for 3DPC PC3-12800R HP SmartMemory
screen
Enabling Intel NIC DMA Channels
This a NIC acceleration option that only runs on Intel Based NICs. For servers that do not have an
Intel NIC, leave this option disabled.
To enable Intel NIC DMA channels:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Advanced Options→Advanced Performance Tuning Options→Intel NIC DMA Channels
and press Enter.
2. Select one of the following options:
•
Enabled
•
Disabled (default)
3. Press F10 to save your selection.
110 Accessing the System Configuration Menu