HP Unified Extensible Firmware Interface - Manual (Page 67)

Figure 57 Server Security — Set Power On Password screen
Setting an Administrator Password
Set an administrator password to protect the server configuration. If enabled, you are prompted
for this password before being allowed to modify the configuration.
To set the administrator password:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Server Security and select Set Admin Password and press Enter.
2. Enter the password and press Enter.
3. Confirm the password and press Enter.
A message appears confirming the password setting was successful.
4. Press F10 to save your entry.
Accessing the BIOS/Platform Configuration (RBSU) menu 67