HP Unified Extensible Firmware Interface - Manual (Page 108)

Figure 99 Advanced Options — Node Interleaving screen
Setting 1333 MHz Support for 3DPC PC3-10600H HP SmartMemory
NOTE: This option is available on Gen8 with 3DPC PC3-10600H HP SmartMemory.
You can enable a memory speed of 1333 Mhz for 3-DIMM per channel configurations and should
be enabled only when the system contains PC3-10600H HP Smart Memory exclusively.
To set 3DPC PC3-10600H HP SmartMemory:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Advanced Options→Advanced Performance Tuning Options→1333 MHz support for
3DPC PC3–10600H HP SmartMemory and press Enter.
2. Select one of the following options:
•
Enabled
•
Disabled (default)
3. Press F10 to save your selection.
108 Accessing the System Configuration Menu