HP Unified Extensible Firmware Interface - Manual (Page 87)

Figure 78 Server Asset Text — Service Contact Information screen
Entering a Custom POST Message
You can enter a custom message to display during server POST in the HP ProLiant POST screen.
To enter a custom POST message:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Server Asset Text and select Custom POST Message and press Enter.
2. Enter a custom POST message as needed. A maximum of 60 characters is supported. By
default, this value is blank.
3. Press F10 to save your selection.
Accessing the BIOS/Platform Configuration (RBSU) menu 87