ADIC SNC 5100 User Manual
Page 79
Ethernet MAP
71
6-00020-02
SNC 5100
If they are not, inform the system administrator that there is a
network hardware problem where the SNC 5100 is attached.
Exit this MAP.
Step 9.
Remove the Ethernet loop back plug.
Step 10.
Obtain another Ethernet cable.
Step 11.
Use this cable to attach the SNC 5100 to the local area network.
Step 12.
Connect the service terminal to the Service Port.
For more information, see “Connecting to the Service Port” on
page 95.
Step 13.
Press the Enter key on the service terminal.
If the prompt is not displayed, go to “Service Port MAP” on
page 75.
Step 14.
From the service terminal, enter the
ifShow
command.
For more information, see the
Example:
SN60023 > ifShow
ibmEmac (unit number 0):
Flags: (0x8063) UP BROADCAST MULTICAST ARP RUNNING
Type: ETHERNET_CSMACD
Internet address: 172.16.76.211
Broadcast address: 172.16.255.255
Netmask 0xffff0000 Subnetmask 0xffff0000
Ethernet address is 00:60:45:17:02:f0
Metric is 0
Maximum Transfer Unit size is 1500
114192 packets received; 364 packets sent
114023 multicast packets received
116 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped