ADIC SNC 5100 - Manual (Page 155)

Commands 147
6-00020-02
SNC 5100
009 SCSI 002 005 000 00000060:450d00c0
010 SCSI 002 005 001 00000060:450d00c0
011 SCSI 001 000 000 00000060:450d00c0
012 SCSI 001 006 000 00000060:450d00c0
value = 0 = 0x0
SN60023 >
devIdThe index of the device in the database.
TypeThe type of interface where the device is connected. SNA indicates an
internal device. SCSI or Fibre Channel indicate I/O interfaces.
ChanThe channel number of the interface where the device is attached
TIdTarget ID mapping for SCSI Initiators
TLunTarget LUN mapping for SCSI Initiators
UIDFor a Fibre Channel interface, the Unique ID of the device. For SCSI
interface, the
SNC 5100 ’s Unique ID.
mapShowDevs
The SNC 5100 maintains a cross-reference map of device addresses.
Information about the presently attached and available devices in the map can
be displayed using the
mapShowDevs command.
SN60023 > mapShowDevs
devId Type Chan iId iLun UID tId tLun Handle Itl
--------------------------------------------------------------
000 SNA 127 127 127 00000060.450d00c0 001 000 c0ec2600h 00000000h
009 SCSI 002 005 000 09000060.450d00c0 255 255 c1f9e090h 00000000h
010 SCSI 002 005 001 0a000060.450d00c0 255 255 c0ad2590h 00000000h
012 SCSI 001 006 000 0c000060.450d00c0 255 255 c1ffdf10h c1ffdc80h
value = 0 = 0x0
SN60023 >
TypeThe type of interface where the device is attached to the SNC 5100.
ChanThe channel number of the interface
iIdFor a SCSI interface only - device ID of the device
iLunFor a SCSI interface only – Logical unit number of the device.
UIDFor a Fibre Channel interface – Unique ID of the device. For SCSI
interface, a constructed Unique ID based on the SNC 5100’s Unique ID.
tIdTarget ID mapping for SCSI Initiators
tLunTarget LUN mapping for SCSI Initiators
Handle An internal pointer used for some diagnostic operations.
Itl An internal pointer used for some diagnostic operations.