ADIC SNC 5100 User Manual
Page 132
SNC 5100
124
Commands
6-00020-02
GBIC. Specifying the port number is optional.
SN600023 > fcGbicShow
---------------------------------------------------------------
Ctlr : Module :
Module
ID : Code :
Information
---------------------------------------------------------------
1 : 4 : Serial Module Definition Protocol
: Connector Type --------------- SC
: Nominal Speed ---------------- 2.5 Gb/sec
: Link length for 9/125 um ----- 0 meters
: Link length for 50/125 um ---- 5500 meters
: Link length for 62.5/125 um -- 2700 meters
: Vendor Name ------------------ FINISAR CORP.
: Vendor OUI ------------------- 009065
: Vendor Part Number ----------- FTR-8519-3-2.5
: Vendor Revision -------------- 1A
: Vendor Serial Number --------- B2557JC
: Vendor Mfg. Date ------------- 10-26-2000
: RX LOS Implemented ----------- Yes
: TX Fault Implemented --------- Yes
: TX Disable Implemented ------- Yes
2 : 4 : Serial Module Definition Protocol
: Connector Type --------------- SC
: Nominal Speed ---------------- 2.5 Gb/sec
: Link length for 9/125 um ----- 0 meters
: Link length for 50/125 um ---- 5500 meters
: Link length for 62.5/125 um -- 2700 meters
: Vendor Name ------------------ FINISAR CORP.
: Vendor OUI ------------------- 009065
: Vendor Part Number ----------- FTR-8519-3-2.5
: Vendor Revision -------------- 1A
: Vendor Serial Number --------- B2557K2
: Vendor Mfg. Date ------------- 10-26-2000
: RX LOS Implemented ----------- Yes
: TX Fault Implemented --------- Yes
: TX Disable Implemented ------- Yes
--------------------------------------------------------------
Parameter
Value
Meaning
Port
1
The SNC 5100 connection labeled FC1
2
The SNC 5100 connection labeled FC2