ADIC SNC 5100 - Manual (Page 164)

SNC 5100
156 Commands
6-00020-02
SN60023 >
The example below shows the rz command when it is used to
receive a file that contains configuration parameters. See also
the sz command for information about sending a configuration
file.
SN60023 > rz
**B000000023be50
Configuration Update in Progress....
Configuration Update Complete. Reboot for Update to Take
Effect.
value = 0 = 0x0
SN60023 >
scsiAltIdGet [channel]
The scsiAltIdGet command displays the alternate ID number for a specified
channel. If no channel is specified, alternate IDs are displayed for all SCSI
channels.
SN60023 > scsiAltIdGet
SCSIbus AltId ------- ---------------
SCSI 1 1
SCSI 2 6
value = -1 = 0xffffffff
SN60023 >
scsiAltIdSet [channel],[id]
The scsiAltIdSet command sets the Alternate Id for the specified SCSI
Channel.
SN60023 > scsiAltIdSet 2,6
Alternate Id set to 6 for SCSI 2
will take effect upon reboot
value = 0 = 0x0
Parameter Value
SCSI Channel Number 1 - 4
ID 0 -15