beautypg.com

Rtcsetcurrent, Command on – ADIC SNC 5100 User Manual

Page 163

background image

Commands

155

6-00020-02

SNC 5100

string:

SN60023 > rtcDateSet 2001,1,26,5,9,30,00

value = 0 = 0x0

SN60023 >

Caution:

The time will be one hour off when Daylight Savings Time is in
effect.

rtcSetCurrent

The

rtcSetCurrent

command is used after the

rdate

timeserver

command in order to synchronize the local Real Time Clock with the
timeserver running on a remote host. Use the

date

command to see the

synchronized settings.

SN60023 > rtcSetCurrent

value = 0 = 0x0

SN60023 >

rz

The

rz

command initiates a receive Zmodem file transfer session. You use this

command when you want to download a file from the service terminal to the
SNC 5100. The file can be either a firmware or configuration file. After issuing
this command, you start the file transfer from the service terminal by initiating
a send file operation that uses Zmodem protocol.

The example below shows the

rz

command when it is used to receive a file that

contains operational firmware. The SNC 5100 extracts individual firmware
modules from the file and saves them temporarily in memory. After the file
transfer has completed, the SNC 5100 copies the firmware modules to
nonvolatile flash memory. The SNC 5100 must be rebooted to use the updated
firmware.

SN60023 > rz

**B000000023be50

Firmware Update in Progress....

Found Image File BOOTROM.IMG – loading

.........Found Image File IPOST.IMG – loading

.........Found Image File SPOST.IMG – loading

Firmware Update Complete. Reboot for Update to Take Effect.

value = 0 = 0x0