Event codes and actions, Check event log – ADIC SNC 5100 User Manual
Page 42
SNC 5100
34
Event Codes and Actions
6-00020-02
Event Codes and Actions
Review all visual observations and Event Codes against Table 7 on page 35.
Check Event Log
Step 1.
To determine what Events are in the Event Log, follow the
procedures in the ADIC Management Console User Guide.
Step 1.
If the ADIC Management Console application is not available,
connect a service terminal to the SNC 5100.
For information about how to do this, see “Connecting to the
Service Port” on page 95.
Step 2.
Press the Enter key on the service terminal.
If the prompt is not displayed, go to “Service Port MAP” on
page 75.
Step 3.
Issue the
loggerDump
command from the service terminal.
For more information, see the
Messages that looks like the ones in Figure 5 display:
Figure 5: Event Log Listing From Service Port