ADIC SNC 5100 - Manual (Page 142)

SNC 5100
134 Commands
6-00020-02
subsystems
targets List all known target devices
uptime Display time since last boot
See User’s Guide for more infomation
value = 39 = 0x27 = ‘’’
SN60023 >
hlthChkHelp
The hlthChkHelp command displays a list of the Health Check commands.
SN60023 > hlthChkHelp
hlthChkIntervalGet - Show Check Interval
hlthChkIntervalSet - Set Check Interval
hlthChkLevelGet - Show Check Level
hlthChkLevelSet - Set Check Level
hlthChkNow - Run Health Check Now
See User’s Guide for more information
value = 0 = 0x0
SN60023 >
hlthChkIntervalGet
The current Health Check interval can be viewed using the
hlthChkIntervalGet command. The example below shows the current
interval is 60 minutes.
SN60023 > hlthChkIntervalGet
value = 60 = 0x3c = '<'
SN60023 >
hlthChkIntervalSet
The Health Check interval controls how often the Health Check process runs.
The interval may range from 1 to 65,535 minutes (about 45 days). Set the
interval using the
hlthChkIntervalSet command.
SN60023 > hlthChkIntervalSet 60
value = 0 = 0x0
SN60023 >