ADIC SNC 5100 - Manual (Page 149)

Commands 141
6-00020-02
SNC 5100
ipstatShow
The ipstatShow command displays Internet protocol statistics for the
Ethernet network. Interpreting these statistics requires detailed knowledge of
Internet networking protocols. This information may be useful to the LAN
administrator.
SN60023 > ipstatShow
total 8380
badsum 0
tooshort 0
toosmall 0
badhlen 0
badlen 0
fragments 0
fragdropped 0
fragtimeout 0
forward 0
cantforward 0
redirectsent 0
value = 1 = 0x1
SN60023 >
licenseShow
The licenseShow command displays information about software license keys
that are installed and the corresponding features that are available. The
following example shows an SNC 5100 that contains a license key for the SFM
and Data Mover features.
SN60023 > licenseShow
License “wsk96-sd59a”: Valid
Features:
SFM,
Data Mover.
value = 1 = 0x1
SN60023 >
loggerDump [number]
Dump records from the system event log to the console using the
loggerDump command. A numeric parameter may be used to indicate the
number of events to display. With no parameter specified, all events in the log