ADIC SNC 5100 - Manual (Page 138)

SNC 5100
130 Commands
6-00020-02
0 0 0 0 ADIC 0338 00000060450d0080
8 2 3 0 OEM OEM DCHS04X 6363 6820837B
9 2 4 0 OEM OEM DCHS04X 6363 682076AC
value = 6 = 0x6
SN60023 >
fcShowNames
The fcShowNames command displays the node and port names (addresses) of
the Fibre Channels.
Ctlr Id Indicates the Channel Number for the interface
PCI Addr The PCI address of the interface, showing bus,
device id, and function number.
ISPType The type of Fibre Channel Controller, ISP2300.
Node Name The Fibre Channel node name for the SNC 5100.
Port Name The Fibre Channel port name for the interface.
fcTxDisable [port]
The fcTxDisable command disables a Fibre Channel port transmitter.
SN60023 > fcTxDisable 1
value = 0 = 0x0
SN60023 >
fcTxEnable [port]
The fcTxEnable command enables or re-enables a Fibre Channel port
transmitter.
Parameter Value Meaning
Port 1 The SNC 5100 connection labeled FC1
2 The SNC 5100 connection labeled FC2