ADIC SNC 5100 - Manual (Page 113)

Managing the SNC 5100 105
6-00020-02
SNC 5100
Service Port Command
Reference
A “shell” interface provides access to the management and configuration
commands referenced in this chapter.
The shell is accessible by connecting a terminal or computer with terminal
emulation software to the SNC 5100’s Service Port. For more information, see
“Connecting to the Service Port” on page 95.
Managing the SNC 5100
The ADIC Management Console application is the preferred method for
managing the SNC 5100. When you use the ADIC Management Console, the
operations described in this reference are carried out through the client
application.
For more information, see the ADIC Management Console User Guide.
The following table is a list of the commands grouped by function.
Commands
This section specifies the commands that are available to control, manage, and
service the SNC 5100.
The commands are listed alphabetically by function in Table 13.
The commands are listed in alphabetical order beginning on page 114.
Table 13: Commands Listed Alphabetically byFunction
Command or Command
Group
Description Page
Command and Control
disableCC Disable Command and Control Interface 117
enableCC Enable Command and Control Interface 118