ADIC SNC 5100 - Manual (Page 49)

Event Codes and Actions 41
6-00020-02
SNC 5100
Action Reference Table
Numerical references from the Action column in Table 7: Event Codes and
Actions are associated with the appropriate MAP in Table 8: Action Reference
Table.
203
6,8 N.A. N.A. Heartbeat communication restored 0
Notes:
1
See Table 9 on page 42.
2
See Table 8 on page 41.
3
Default Trap Threshold settings are explained “Events” in the ADIC Management Console User
Guide.
4
Check the Event Log to find out which interface (FCAL or SCSI) caused this event. Then use the
appropriate action number.
5
This trap signals a change in state. A string sent with the trap will indicate the nature of the previous
state.
6
Events not logged in SNC 5100 Event Log.
7
Not Reported. View the Server Log.
8
Event reported only when ADIC Management Console 2.7 or above is running
Table 8: Action Reference Table
Action
Number Action
0 No action necessary
1 Go to “SCSI Channel MAP” on page 50
2 Go to “Fibre Channel MAP” on page 61
3 Go to “MAP for the SNC 5100” on page 66
4 Go to “Temperature MAP” on page 66
5 Go to “Power MAP” on page 68
Table 7: Event Codes and Actions
Event
Code
Viewing
Level
1
Default
Trap
Threshold
Description Action
2