ADIC SNC 5100 - Manual (Page 181)

Commands 173
6-00020-02
SNC 5100
snmpReadCommunityAdd “ string ” , [view]
The snmpReadCommunityAdd command adds the specified string to the
list of accepted strings for SNMP Read operations (Get and GetNext). The
View switch must be set to “1” to be accepted by the ADIC Management
Console.
For more information, see the ADIC Management Console User Guide.
SN60023 > snmpReadCommunityAdd “adic”,1
Success
value = 4 = 0x4
SN60023>
snmpReadCommunityRemove “ string ”
The snmpReadCommunityRemove command removes the specified string from
the list of accepted strings for SNMP Read operations.
SN60023 > snmpReadCommunityRemove “adic”
Success
value = 3 = 0x3
SN60023 >
snmpTrapCommunitySet “ string ”, [view]
The snmpTrapCommunitySet command sets the community string passed
with all SNMP traps. The View switch must be set to “1” to be accepted by the
ADIC Management Console.
For more information, see the ADIC Management Console User Guide.
SN60023 > snmpTrapCommunitySet “adic”,1
Success
value = 8 = 0x8
SN60023 >
snmpWriteCommunityAdd “ string ”, [view]
The snmpWriteCommunityAdd command adds the specified string to the list
of accepted strings for SNMP Write operations (Set). The View switch must be
set to “1” to be accepted by the ADIC Management Console.