ADIC SNC 5100 - Manual (Page 189)

Commands 181
6-00020-02
SNC 5100
Idx Tdev Vendor Product Rev | Type Specific
----------------------------------------------|---------------
0 0xc194a400 ADIC Local 0252 | Cmd/Cntrl Status 0h
2 0xc1ffc390 ADIC 5324 | Tape: Blk Size 32768 , flags 7h
3 0xc1ffc290 ADIC 5324 | Changer: flags 7h
value = 4 = 0x4
SN60023 >
IdxDevice Index in the target list.
TdevAn internal pointer, used for some diagnostic operations
VendorThe content of the Vendor ID field from the SCSI Inquiry Data
ProductThe content of the Product ID field from the SCSI Inquiry Data
RevThe content of the Revision ID field from the SCSI Inquiry Data
Type SpecificFor each device type, information pertinent to the device
tcpstatShow
The tcpstatShow command displays TCP statistics for the Ethernet network.
Interpreting these statistics requires detailed knowledge of Internet networking
protocols. This information may be useful to the LAN administrator.
SN60023 > tcpstatShow
TCP:
301 packets sent
278 data packets (18371 bytes)
0 data packet (0 byte) retransmitted
23 ack-only packets (22 delayed)
0 URG only packet
0 window probe packet
0 window update packet
0 control packet
516 packets received
272 acks (for 18372 bytes)
1 duplicate ack
0 ack for unsent data
276 packets (322 bytes) received in-sequence
0 completely duplicate packet (0 byte)
0 packet with some dup. data (0 byte duped)
0 out-of-order packet (0 byte)
0 packet (0 byte) of data after window
0 window probe
0 window update packet
0 packet received after close
0 discarded for bad checksum