ADIC SNC 5100 - Manual (Page 148)

SNC 5100
140 Commands
6-00020-02
Metric is 0
Maximum Transfer Unit size is 32768
0 packets received; 0 packets sent
0 multicast packets received
0 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped
value = 29 = 0x1d
SN600752 >
inetstatShow
The inetstatShow command displays statistics about Internet protocol
sockets for the Ethernet network. Interpreting these statistics requires detailed
knowledge of Internet networking protocols. This information may be useful to
the LAN administrator.
SN60023 > inetstatShow
Active Internet connections (including servers)
PCB Proto Recv-Q Send-Q Local Address Foreign Address (state)
-------- ----- ------ ------ ------------------ -------------
c1fee18c TCP 0 0 192.168.1.59.23 206.0.64.117.4239
ESTABLISHED
c1fee40c TCP 0 0 0.0.0.0.52787 0.0.0.0.0 LISTEN
c1fee58c TCP 0 0 0.0.0.0.21 0.0.0.0.0 LISTEN
c1fee68c TCP 0 0 0.0.0.0.23 0.0.0.0.0 LISTEN
c1feea0c TCP 0 0 0.0.0.0.513 0.0.0.0.0 LISTEN
c1fee48c UDP 0 0 0.0.0.0.161 0.0.0.0.0
value = 1 = 0x1
SN60023 >
initializeBox
The initializeBox command removes configuration files, such as
management configuration and SCSI device maps, and then prompts to reboot.
Caution
Use this function with care as data may be lost as a result of devices
moving to different LUNs when the mapping database is removed.
Make sure all I/O has been stopped.