ADIC SNC 5100 - Manual (Page 153)

Commands 145
6-00020-02
SNC 5100
SN60023 >
If you have not been using SFM the output of this command will not reference
SFM.
SN60023 > mapCompressDatabase
This command will compress the Persistent Device Map.
Do you want to compress the Device Map? (y or n) y
0xc1689ac0 (tShell): Wrote 23 device maps to file
'nvfs:config/device.map'
Device Map Compressed
value = 23 = 0x17
SN60023 >
mapHelp
The mapHelp command displays a list of the persistent address map database
commands.
SN60023 > mapHelp
mapCompressDatabase - Compress Device Map Database
(reboot required)
mapRebuildDatabase - Rebuild Device Map Database (reboot
required)
mapShowDatabase - Show the Map Database
mapShowDevs - Show currently attached devices
mapWinnowDatabase - Remove unatached devices from database
See User’s Guide for more information
value = 0 = 0x0
SN60023 >
mapRebuildDatabase
Caution
Clearing the map database will cause device addresses to change
unpredictably. Use this command only when no host systems are
expecting devices to remain at their current addresses. The SNC
5100 must be rebooted after executing this command.
Occasionally, it may be necessary to eliminate the Persistent Device Map
database entirely, allowing the existing devices to have new addresses assigned.