GW Instek APS-1102 Control Software User Manual - Manual (Page 96)

APS-1102 Control Software User Manual
9-6
9.4.1 Adding, inserting, deleting, and moving a row
Clicking the Add button  adds a new row. Default values are shown in the newly added row.
The step number is automatically incremented by units of 1.
Clicking the Insert Row button adds a new row immediately before the selected row. Default
values are shown in the inserted row.
Clicking the Delete Row button deletes the selected row.
Clicking the Move Row buttons  and  moves the selected row up or down.
If the jump destination is deleted due to the delete operation, the jump number is set to “0”. If the
jump destination is changed due to an insert, delete, or move operation, the jump number changes
accordingly.
When the Add button
 is clicked twice in the status shown in “Figure 9-2”, the window will
change as follows:
Add button
Move button
Figure 9-3 Move and Add Buttons