GW Instek APS-1102 Control Software User Manual - Manual (Page 104)

APS-1102 Control Software User Manual
9-14
9.7 Monitoring the Sequence Execution
The SEQ window allows monitoring of how the sequence is being executed.
As shown in “Figure 9-9”, the current step is indicated by a change of color in the common
parameters or sequence execution parameters setting area.
The row of the current step is
indicated in a different color.
Figure 9-9 Monitoring the Sequence Execution
Once the sequence execution stops, the sequence execution monitor stops automatically,
displaying the sequence execution stop message.
 The software monitors the device output condition when the sequence is being executed. If the
device output goes off while the sequence is being executed, the software displays a message,
stopping the sequence execution.
！ Caution