7 copy and paste, 6 print, 1 edit operation – GW Instek APS-1102 Control Software User Manual User Manual
Page 63: 2 clipboard
7.7 Copy and Paste
7-11
7.6.6 Print
Waveform data created using the “ARB” can also be printed out as a waveform. However, note that
the grid is not printed out.
See “7.3 Setting Menu”.
Selecting [File] - [Print] (
Alt
,
F
,
P
or
Ctrl
+
P
) displays the screen titled [ARB - Print].
Make settings for the printer or font as needed and click the OK
button.
The upper, lower, and left margins cannot be set when printing the waveform.
Margin setting is invalid when printing the
waveform.
Printer settings
Font specification
7.7 Copy and Paste
In the “ARB”, waveform data can be edited using the cut, copy, and paste functions.
Cuts the waveform data in the selected range to the clipboard.
Copies the waveform data in the selected range to the clipboard.
Replaces the waveform data in the selected range with the data on
the clipboard.
Deletes the waveform data in the selected range.
7.7.1 Edit
operation
- Cut
[Edit] - [Cut]
(
Alt
,
E
,
T
or
Ctrl
+
X
)
- Copy
[Edit] - [Copy]
(
Alt
,
E
,
C
or
Ctrl
+
C
)
- Paste
[Edit] - [Paste]
(
Alt
,
E
,
P
or
Ctrl
+
V
)
- Delete
[Edit] - [Delete]
(
Alt
,
E
,
D
or
Ctrl
+
D
)
For details on each editing operation, see “Figure 7-2 Waveform Editing Operation”.
7.7.2 Clipboard
Executing the cut or copy operation sends the waveform data in the selected range to the clipboard.
The clipboard is a temporary data storage area provided in Windows.
The waveform data in the selected range is sent to the clipboard. The data equivalent to 16 bits
(
32768 to +32767) is regarded as one data unit contained in one numerical row.