GW Instek APS-1102 Control Software User Manual - Manual (Page 126)

APS-1102 Control Software User Manual
12-2
12.1 Launcher Errors
The following table summarizes the error specifications of the APS-1102 Control Software.
Table 12-1 APS-1102 Control Softeware Error Messages
Message Description
Can’t start RMT. The specified software cannot be started because the
software displayed on the message is operating. Exit the
software displayed on the message and then start the
specified software.
Can’t start ARB.
Can’t start SEQ.
Quit RMT The software cannot be exited because the software
displayed on the message is operating. Exit the software
displayed on the message and then exit.
Quit ARB
Quit SEQ