GW Instek APS-1102 Control Software User Manual - Manual (Page 32)

APS-1102 Control Software User Manual
4-8
4.6 Device Setting File
The settings for each setting item that can be set with the “RMT Remote Control Software”
(except for output on/off setting) can be saved to and read from the “device setting file”.
The extension for the “device setting file” is “.MSF”.
If the device is in the online status when the device setting file is read, the items are set to the
device according to the device setting file to be read.
4.6.1 Saving the device setting file
Select [File(F)] - [Save As(A)] or click the Save button to display the [Save As] dialog box.
Specify a file name and click the OK button. Settings are saved under the specified file name.
When the save operation is completed, the saved file name is displayed on the title bar on the remote
control screen.
If [File(F)] - [Save(S)] is selected when the device setting file has been already saved or read, the
existing device setting file is overwritten.
If the above operation is attempted when any device setting file has not yet been saved or read, the
operation will be the same as the [Save As(A)] operation.
4.6.2 Reading the device setting file
Select [File(F)] - [Open(O)] or click the Open button to display the [Open File] dialog box.
Specify a file name and click the OK button. The setting values are then read from the specified
device setting file.
If the device is in the online status when settings are read, the read items are set to the device
according to the device setting file currently read. If the output is in the on status, the output is
turned off, each setting item is set to the device, and then the output is turned on again.
If the read operation is completed, the read file name is displayed on the title bar on the remote
control screen.
4.6.3 Comments
The comment input in the comment field is saved to the “device setting file”, in addition to the
settings.
When the device setting file is read, the comment information in the read file is displayed in the
comment field.
Up to 128 characters can be input to the comment field and saved to the device setting file.