GW Instek APS-1102 Control Software User Manual - Manual (Page 101)

9.5 Copying the Sequence Data
9-11
9.5 Copying the Sequence Data
The sequence data can be copied in either the common parameters or sequence execution
parameters setting area.
Sequence data cannot be copied in the branch step setting area.
Follow the procedure below to copy the sequence data.
<1> Select the sequence data to be copied, including the operational type setting.
<2> Select [Edit] – [Copy] to copy the data.
<3> Select the destination.
<4> Select [Edit] – [Paste] to paste the data.
Although data can be selected in cell, line, and row units, if the format of the selected data differs
from that of the copy destination, paste is not possible. That is, data in one cell or column cannot
be copied to a cell or column in another column.
！ Caution