Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 99)

Survey Menu
R-93
Auto Collect – Screen Two
The second Auto Collect screen displays information related to the
points that have been stored and when the next point will be stored.
The box in the upper-left corner displays the direction
and distance the total station is aiming relative to the
backsight.
The upper-right corner displays the next store point
number and when the next point will be stored in either
seconds or distance.
The lower-left corner is a graphic that shows the current
total station position, the current prism position, and
when collecting by distance, the approximate location of
the next store point (represented by an
X ) based on the
speed and direction the prism is moving from the
previous store point. Previous stored points are also
displayed as dots in this part of the screen.
The lower-right corner of the screen displays the number
of points that have been stored and the speed and
direction the prism is traveling.
6WRUH 1RZ : stores a point at the current prism location, even if the
time / distance criteria is not yet met.
%DFN : returns to the previous Auto Collect screen.
6WDUW / 6WRS : toggles between starting or stopping the Auto Collect
routine.