Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 43)

Job Menu
R-37
that you are on the line. When performing Remote Stakeout, the
final graphic screen that is displayed when you are near the stake
point will occur when you are within the distance to the stake point
specified here.
Turn gun to design point : only applies to motorized total stations.
The following options are available:
•
2D (HA only) : A motorized total station will turn horizontally
toward the design point after tapping the 7XUQ *XQ button in
the particular stakeout screen.
•
3D (HA and ZA) : A motorized total station will turn
horizontally and vertically toward the design point after
tapping the
7XUQ *XQ button in the particular stakeout
screen.
•
Automatic 2D (HA only) : A motorized total station will
automatically turn horizontally toward the design point when
the stakeout screen opens.
•
Automatic 3D (HA and ZA) : A motorized total station will
automatically turn horizontally and vertically toward the
design point when the stakeout screen opens.
Cut Sheet Offset stored : The cut sheet offset information can be
stored to the raw data file in either of the following formats when
performing any offset staking routine:
•
Design Offset : when selected, a cut sheet report will list the
design-offset values.
•
Actual Offset : when selected, a cut sheet report will list the
measured-offset values.