3d view – Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual User Manual
Page 75
Job Menu
R-69
3D View
-RE 9LHZ '70 ' 9LHZ«
The 3D View screen is used to view the DTM from any angle.
6HWWLQJ : opens the 3D View Settings screen, described
below, where the information displayed in the 3D view
can be configured.
9ROXPH : displays the total cut and fill volume between
the area that has been staked and a reference datum,
whose elevation is specified in the 3D View Settings
screen; or the total cut and fill between the area that has
been staked and the selected DTM.
Datum
: displays the datum elevation set in the 3D View
Settings screen.
: Toggles to display or hide the point names and
descriptions.
: When this button is activated (pressed in), dragging
within the 3D View will result in the image being rotated to any
angle. When the button is not activated, dragging within the 3D
View will move the image to any location.