Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 160)

Survey Pro Reference Manual
R-154
Data : shows the angle and distance information from the previous
shot.
Result : shows the current northing, easting, and elevation of the
rod as well as the computed elevation of the DTM at the current
location and the cut or fill necessary to bring the elevation at the
current location to the elevation of the DTM at the current
location.
C.L. : shows the current station and offset information for the rod
location relative to the centerline selected from the previous
screen. The type of line segment in the polyline at the current
station is also displayed. (This card is only available if the
With
C.L. checkbox was checked in the previous screen.)
Note: If the DTM EL and Cut / Fill fields are blank after taking a
shot, it indicates the rod is outside the DTM boundary.
Note: Tapping anywhere within the map view will open a larger map
view, which provides zoom controls.