Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 35)

Job Menu
R-29
was entered in the total station. These numbers must match for
successful communications.
%OXHWRRWK« : (applicable only when using Bluetooth with a Recon and
a supported total station) accesses the Bluetooth configuration screen
that comes with the Bluetooth driver software where you can quickly
check or change the virtual COM port and favorites.
Note: See the User’s Manual for more information on configuring
Bluetooth with a Recon and supported total station.
'HIDXOWV : will set the Serial Port , Baud Rate and Parity to their
default values based on the selected total station.
,QVWUXPHQW 6HWWLQJV« : accesses the settings that are specific for the
selected total station. This screen can also be accessed with the
Instrument Settings Quick Pick. (See the notice below.)
6HQG WR ,QVWUXPHQW : (applicable only to specific total stations) will
send the selected instrument settings to the total station. This is
particularly useful with robotic total stations after the total station
has been reset.