Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 92)

Survey Pro Reference Manual
R-86
Repetition Shots
6XUYH\ 5HSHWLWLRQ 6KRWV
The Repetition Shots screen is used to perform side shots or traverse
shots using any number of repetitions.
Note: The sequence that the repetition shots are performed is
selected in the Repetition Settings screen (Page R-38).
6HWWLQJV : located at the top of the screen, is a shortcut
to the Surveying and Repetition Settings screens (Page
R-34 and R-38 respectively).
Foresight : is the name of the point that will be stored.
Number of Sets : is the desired number of sets to shoot to
the backsight and foresight.
Note: One set is equivalent to two shots to the backsight
and foresight point.
HR : is the rod height.
Average (of) : shows the average angle or distance to the
foresight from all the shots taken. The value in
parenthesis is the total number of repetitions performed.
Worst Residual : displays the worst residual calculated from all the
sets of the selected measurement type.
Description : is the description for the point that is being stored. This
field appears prior to storing the new point.
Note: A residual is the difference between a single measurement and
the average of all the measurements.