Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 161)

Stakeout Menu
R-155
Define a Location
6WDNHRXW 'HILQH D /RFDWLRQ
The Define a Location screen is used to manually enter the distance
and direction to a new point from any existing reference point and
then stakeout the new point.
From Point : is the reference point that the specified
angle and distance information is applied to for locating
the new point.
$]LPXWK / %HDULQJ : is the direction from the reference
point to the new point.
+/- Angle : is the angle to be added to the specified
azimuth or bearing, thus modifying the direction to the
new point.
Note: To subtract an angle from the specified azimuth or
bearing, enter a negative
+/- Angle value.
Horiz. Dist : is the horizontal distance from the reference
point to the new point.
Vert. Dist : is the vertical distance from the reference point to the new
point.
Store point : When this is checked, the computed point will be stored
with the name specified here.
6ROYH : will compute the location for the new point and access the
next screen.