Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 155)

Stakeout Menu
R-149
Store Offset Points – Screen Three
The third Store Offset Points screen is used to define which offset
points will be stored.
From Station : is the station where the stored offset
points will begin.
To Station : is the station where the stored offset points
will end.
Station Interval : is the distance between the stations
where offset points are stored.
Note: If the Stake Corners option is selected in the
Stakeout Settings screen, offset points will also be
stored where ever the horizontal or vertical section of
the road changes.
Start Point : is the point number that will be assigned
to the first offset point that is stored. Each stored
point that follows will be assigned the next available point number.
Description : is the description that will be assigned to all the offset
points that are stored.
; Center Line : offset points will be stored at locations on the
centerline when checked.
; Edge of Pavement : offset points will be stored at the end of the
first segment (the edge of the roadbed) on the left and/or right side
when checked.
;
Curb : offset point will be stored at the end of the second segment
(the end of the curb or ditch) on the left and/or right side when
checked.
8QVHOHFW $OO : quickly unchecks all the checkboxes.
%DFN : returns to the previous screen.
6WRUH : stores all the offset points based on the information provided.