Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 186)

Survey Pro Reference Manual
R-180
Note: a boundary has two fixed sides and one side defined by a
direction when using the Hinge Method. It has one fixed side and two
sides defined by a direction when using the Parallel Method.
(GLWRU« : accesses the Polyline Editor (Page R-48) where
a new polyline can be created or an existing polyline can
be modified.
7DS 3RLQWV« : provides a map view where you can tap
any existing points to define the fixed sides of the
boundary.
7R)URP« : provides point selection by entering point
names.
;
Store Pt 1 / 2 : When checked, will store a point at the
location of the end point(s) of the computed boundary
line.
$]LPXWK / %HDULQJ : defines the direction of the
boundary sides with lengths that are not yet known.
Results
Point 1 / 2 : Displays the coordinate of the end points of the computed
boundary line.
Total Area : is the total area of the boundary.
Plot Area : is the area enclosed by the pre-defined fixed boundary
lines.
Difference : is the difference between the Total Area and the Plot Area .