Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 125)

Stakeout Menu
R-119
Stake to Line
6WDNHRXW 6WDNH WR /LQH
The Stake to Line screen allows you to locate points on a continuous
predefined line starting from shots to a prism at any location.
Direction information is provided for the rod to locate the line by
traveling the shortest possible distance (a perpendicular offset to the
line) and by traveling on the line between the rod and the total
station.
Start Point : defines the first point of the line to be
staked.
(QG 3RLQW / 'LUHFWLRQ : defines the second point on
the line, or the direction of the line to be staked,
respectively.
Begin Station : defines the station associated with the
Start Point .
%DFNVLJKW« : accesses the Backsight Setup screen (Page
R-78).
6WDNH! : takes you to the second Stake Points screen,
described below.
Graphic when prism is
greater than 10-feet
from the line. Graphic when prism is
between 1-foot and
10-feet from the line. Graphic when prism is
within 1-foot of the line Graphic when prism is
on the line or within the
Horizontal Distance
Tolerance specified in
the Stakeout Settings
screen (Page R-35).