Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 20)

Survey Pro Reference Manual
R-14
Import *.CR5 Coordinates
The Import CR5 dialog box will open when importing
coordinates from a TDS CR5 coordinate file. Simply
select the distance units that the coordinates were stored
in and tap OK.
Import *.TXT Coordinates
Since the coordinates in an ASCII *.TXT file can be stored in a
variety of formats, two screens are used to define the format of the
file that is being imported. The source *.TXT file can contain either
plane coordinates or geodetic coordinates.
Delimiters : is the character that separates each column
of text in the ASCII file.
Units : are the units that the distances in the file were
stored in.
Coordinates : is used to specify if the coordinates are
plane coordinates, geodetic coordinates in degrees-
minutes-seconds format, or geodetic coordinates in
decimal format.
;
Skip the first row : should be checked if the first line in
the ASCII file contains non-coordinate information, such
as a heading.
1H[W ! : opens the second screen.