Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 234)

Survey Pro Reference Manual
R-228
Road Slope Staking – Screen Two
The second Road Slope Staking screen is used to set up
some slope stake parameters prior to slope staking the
road.
Station : is the station to be slope staked.
Station Interval : specifies how far to advance from the
current station to the next station.
1H[W 6WDWLRQ : advances the current station by the
Station Interval .
Note: If the Stake Corners option is selected in the
Stakeout Settings screen, the 1H[W 6WDWLRQ button will
also stop at any horizontal or vertical alignment node,
and the beginning and end of any widening and super elevation that
falls within the interval.
%DFNVLJKW« : accesses the Backsight Setup screen (Page R-78).
%DFN : returns to the previous screen.
H. Map Card
The H. Map card displays information about the horizontal details of
the road at the current station.
Segment Type : displays the type of horizontal section at the current
station.
Left / Right : is the description of the left and right templates that are
being used at the current station.