Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 168)

Survey Pro Reference Manual
R-162
North : is the Y-coordinate on the specified line, tangent to the
perpendicular offset.
East : is the X-coordinate on the specified line, tangent to the
perpendicular offset.
Elevation : is the elevation on the specified line, tangent to the
perpendicular offset.
Inverse Point to Polyline
,QYHUVH 3RLQW WR 3RO\OLQH
The Inverse Point to Polyline screen computes the offset distance
from a known point perpendicular to a polyline.
Inverse Point : is the known point that the offset to a
polyline segment is computed.
Begin Station : is the starting station assigned to the
beginning of the polyline, which is used to compute the
Station in the results.
7DS 3RO\OLQH : allows you to tap an existing polyline from
a map view.
(GLWRU : accesses the Polyline Editor (Page R-48) where a
new polyline can be created or an existing polyline can
be modified.
7DS 3RLQWV : provides a map view where you can tap any
existing points to create a temporary polyline.
7R)URP : provides point selection by entering point
names.