Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 137)

Stakeout Menu
R-131
Left / Right : displays if a Cut or Fill slope is being computed and if it is
on the Left or Right side of the road, respectively.
Rod Elev : is the current elevation at the rod location.
Des. Slope : is the design cut or fill slope.
Obs. Slope : is the computed (observed) cut or fill slope based on the
last shot and the corresponding hinge point.
Cut / Fill : is the cut or fill required for the current rod location to be
positioned on the design slope.
Toward CL / Away CL : is the computed horizontal distance that the
rod must move either toward the centerline or away from it,
respectively, before it is positioned at the catch point.
Note: The computed horizontal distance is based on the observed
terrain computed from the last two shots. If only one shot has been
taken, it is assumed that the terrain is level when computing this
value.
On Station / Back Sta / Ahead Sta : informs you if the rod is on the
station being staked, or the distance it must move (parallel to the
centerline) back or ahead to be on the correct station.
HD to HP : is the horizontal distance from the rod to the hinge point.
VD to HP : is the vertical distance from the rod to the hinge point.
HD to CL : is the horizontal distance from the rod to the centerline.
VD to CL : is the vertical distance from the rod to the centerline.
6WRUH 66« : will store the last shot taken as a side shot.
%DFN : returns to the previous screen.
6WRUH ! : opens the next screen.