Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 60)

Survey Pro Reference Manual
R-54
Edit Alignment Screen – POB Tab
The POB ( P oint O f B eginning) tab in the Edit Alignment
screen is used to define the starting location of the
alignment. The first horizontal and vertical segment
will always begin at this location.
/RFDWLRQ : the starting location for the horizontal and
vertical alignments will be at the specified North , East
and Elev coordinates.
3RLQW : the starting location for the horizontal and
vertical alignments will be at the specified Point .
Start Station : is the station on the alignment that
corresponds with the starting location or point.
Edit Alignment Screen – General Tab
The General tab in the Edit Alignment screen is used to
describe the alignment and select the layer where it is
located.
Description : is the description of the alignment.
Layer : is the layer where the alignment will be located.
$WWULEXWHV : accesses the Point Feature Attributes screen
(Page R-46) where the feature attributes for the
alignment can be selected.