Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 174)

Survey Pro Reference Manual
R-168
Point in Direction
&RJR 3RLQW LQ 'LUHFWLRQ
The Point in Direction screen will calculate and store the position of a
new point after providing a distance and direction from a known
point.
From point : is the point name of the reference point used
for locating the new point.
$]LPXWK / %HDULQJ : is the direction from the reference
point to the new point.
+/- Angle : is the angle added to the Azimuth / Bearing to
modify the direction to the new point.
Note: To subtract an angle from the specified azimuth or
bearing, enter a negative
+/- Angle value.
Horiz. Dist : is the horizontal distance from the reference
point to the new point.
Vert. Dist : is the vertical distance from the reference
point to the new point.
Store point : When this is checked, the computed point will be stored
with the name specified here.
6ROYH : will compute the location for, and optionally store the new
point.