Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 109)

Survey Menu
R-103
Remote Elevation
6XUYH\ 5HPRWH (OHYDWLRQ
The Remote Elevation screen will compute the elevation for the
occupy point by shooting a foresight with a known elevation, or it will
compute the elevation for a foresight when the occupy elevation is
known.
Known Elevation Is… : is where you specify if the Occupy
point or the Foresight point has a known elevation.
Elevation : is the known elevation for the selected point.
Shoot : defines if you want to perform a Direct shot only,
or Direct & Reverse shots to the foresight.
HI : is the distance that the total station is above the
ground.
HR : is the length of the rod.
; Store Pt : When checked, the elevation of the point
specified here will be replaced with the computed
elevation.
7DNH 6KRW« : computes the elevation for the point that
had an unknown elevation and optionally writes that
elevation to the specified Store Pt .
Results
OCC Elevation : displays the elevation for the occupy point.
FS Elevation : displays the elevation for the foresight point.