Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 88)

Survey Pro Reference Manual
R-82
Note: prior to storing a point, you may then be prompted for
description, rod height, layer, and/or feature information depending
on the selections made in the Surveying Settings screen.
%DFNVLJKW« : accesses the Backsight Setup screen (Page R-78) where
the current backsight can be modified.
Note: The current backsight information is displayed across the top
of the Traverse / Sideshot screen.
Results
Angle Right : is the horizontal angle right around the Occupy Point
from the Backsight to the Foresight Point .
Azimuth : is the azimuth from the Occupy Point to the Foresight Point .
Zenith : is the zenith angle measured by the total station to the prism.
Slope Dist : is the slope distance measured by the total station to the
prism.
Horz Dist : is the horizontal distance from the Occupy Point to the
Foresight Point .
Vert Dist : is the vertical distance from the Occupy Point to the
Foresight Point .
Point : is the name of the stored point.
Desc : is the description of the stored point.
Location N : is the Y-coordinate of the stored point.
Location E : is the X-coordinate of the stored point.
Location Z : is the elevation of the stored point.