Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 242)

Survey Pro Reference Manual
R-236
3RLQW / /RFDWLRQ : allows you to enter either a point name or
location coordinates.
6ROYH : adjusts the selected points in the same direction or distance
as defined from the From point to the To point, or by the direction and
distance entered.
Rotate
$GMXVW 5RWDWH
The Rotate screen will rotate selected points around a specified point.
This is useful to correct a survey where an incorrect backsight was
used during data collection.
7DS 3RLQWV« : allows you to select points by tapping
them from a map view.
7R)URP« : allows you to select points by typing in a
point range.
Rotation Point : The selected points will be rotated
around the point specified here. (The coordinates for the
rotation point will not change.)
Simple Angle : when selected, this allows you to enter the
deflection angle to rotate the selected points.
Old and New Azimuths : when selected, this allows you to
enter an old and new azimuth, which is used to compute
the angle to rotate the selected points.
Note: The choice made from the two options above determines which
fields will be available below.