Edit segment – Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual User Manual

Page 216

Survey Pro Reference Manual

R-210

5HPRYH : removes the selected segment and automatically joins the

previous segments to the following segments.

Note: When a segment is removed the existing segments toward the
centerline will not change. Only those on the side of the removed
segment away from the centerline are adjusted.

Edit Segment

5RDGV (GLW 7HPSODWHV (GLW« ,QVHUW«

5RDGV (GLW 7HPSODWHV (GLW« (GLW«

5RDGV (GLW 7HPSODWHV 1HZ« ,QVHUW«

The Edit Segment screen is identical to the New Template screen and
is used to create a new template or edit an existing one.

Segment Name

: is the name for the segment. A name is

required, but it does not have to be unique.

Horizontal Dist

: is the horizontal length of the offset

Slope / V Offset

: is the slope of the segment, or the

vertical length, respectively. When defining a vertical
offset, select the

if the segment travels downward, or

select

if the segment travels upward from the point

of view of the centerline.

Note: A segment with a negative slope will result in
water that flows from the centerline toward the road
edge.