Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 140)

Survey Pro Reference Manual
R-134
Stake Line and Offset
6WDNHRXW /LQH DQG 2IIVHW
The Stake Line and Offset screen is used to stake stations on a line,
or at an offset to it, at fixed intervals.
6HWWLQJV : located at the top of the screen, accesses the
Stakeout Settings screen (Page R-35).
Start Point : defines the first point of the line to be
staked.
(QG 3RLQW / 'LUHFWLRQ : defines the second point of the
line, or the direction of the line to be staked, respectively.
Begin Station : defines the station associated with the
Start Point .
%DFNVLJKW« : accesses the Backsight Setup screen (Page
R-78).
1H[W! : opens Screen Two.
Stake Line and Offset – Screen Two
Station to Stake : is the desired station that you want to
stake.
Station Interval : is the value that is added to the Station
to Stake after the 1H[W 6WD button is pressed.
1H[W 6WD : advances the
Station to Stake by the Station
Interval .
Offset : defines the offset distance and if the offset occurs
to the right of the line, when R is selected, or left, when
L is selected. The right or left side is referenced while
viewing the line from the Start Point .
9HUWLFDO 2IIVHW : is the offset distance that is below the
design location (when D is selected) or above the design
location (when U is selected).