Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 30)

Survey Pro Reference Manual
R-24
Transfer
)LOH 7UDQVIHU
The Transfer screen allows you to transfer files between the data
collector and another device running TDS software.
Connecting to : specifies which device you are
communicating with from the following options:
•
HP48 : if you are connecting to a Hewlett Packard
HP 48 calculator.
•
Husky (DOS) : if you are connecting to a Husky
FS-series data collector.
•
Ranger / TSCe / Pocket : if you are connecting to
another Windows CE-based data collector.
•
Windows PC : if you are connecting to a personal
computer that is running Windows CE Services.
•
Geodimeter 600 : if you are connecting to a
Geodimeter 600-series total station running TDS
onboard software.
COM Port : specifies which COM port you are using on the local
machine. (COM 1 is the only available serial port on a Ranger.)
Baud Rate : specifies the communications speed. The baud rate must
match in both units for successful communications.
Parity : specifies the parity. The parity must match in both units.
When in doubt, select None here. All transfers are controlled from
the PC when in this special mode.
(QWHU 6HUYHU 0RGH : places the data collector in server mode where all
file transfers are controlled from a PC running either TDS Survey
Link or TDS ForeSight. Tapping
&DQFHO will disconnect server mode.
6HQG )LOH« : will open the Open dialog box where the file that you
want to send can be selected. Once selected, the file is sent from the
data collector to the specified device. A progress bar will be displayed