Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 98)

Survey Pro Reference Manual
R-92
Auto Collect
6XUYH\ $XWR &ROOHFW
The Auto Collect screen allows users with robotic total stations to
automatically collect points either at a specified time interval or after
the rod has moved a specified horizontal distance.
Note: This routine only works when used with a robotic total station
in remote control mode.
6HWWLQJV : located at the top of the screen, is a shortcut
to the Surveying Settings screen (Page R-34).
Foresight : is the point name that will be used when
storing the first new point. Each successive point name
will automatically be incremented by the next available
point number.
Description : is the description that will be assigned to all
the points that are stored from this routine.
Time : when this radio button is selected, a point will
automatically be stored after each time specified in the
corresponding field passes.
Distance : when this radio button is selected, a point
will automatically be stored each time the prism is
moved from the last stored point by the horizontal
distance specified in the corresponding field.
Note: The accuracy that a point will be stored when auto collecting
by Distance will vary depending on how frequently the total station
measures a distance and how fast the prism is traveling.
%DFNVLJKW« : accesses the Backsight Setup screen (Page R-78).
1H[W ! : accesses the next screen.