Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 252)

Survey Pro Reference Manual
R-246
Map View
Many screens provide access to a map view, which show the points
from the current job and other useful information. It can be accessed
from the Main Menu with the button, or any screen that has a
button. Some map views also display a vertical profile.
Tip: You can pan around your map by dragging your
finger or stylus across the screen.
Zoom Extents Button: will change the scale of the
screen so that all the points in the current job will fit on
the screen.
Zoom In Button: will zoom the current screen in by
approximately 25%.
Zoom Out Button: will zoom the current screen out
by approximately 25%.
Zoom Window Button: allows you to drag a box
across the screen. When your finger or stylus leaves the screen, the
map will zoom to the box that was drawn.
Increase Vertical Scale : is only available when viewing a vertical
profile. Each time it is tapped, the vertical scale of the view is
increased.
Decrease Vertical Scale : is only available when viewing a vertical
profile. Each time it is tapped, the vertical scale of the view is
decreased.
Zoom Preview Button : will display only the points that are
currently in use.
Display / Hide Labels Button : this button will toggle on and off
the names and descriptions associated with the points on the screen,
or it will access the Map Display Options screen, described above,
depending on which screen the button is pressed from.